D5244T2 engine — Volvo 2.4 TD (2.4L)
2.4L · 131 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | D 5244 T2 |
| Capacity | 2401 cc |
| Idle speed | 700 rpm |
| Normal | 24 - 31 bar |
| Minimum | 22 bar |
| Differential limit between cylinders | < 5.0 bar |
| Oil pressure | 1.0 / 800 3.5 / 4000 bar/rpm |
Engine (diesel)
| System (make and type) | Bosch EDC 15C11 |
| High-pressure pump: | CR/CP 3S3/R110/30-789S |
| Pressure | 300 - 1600 bar |
| Pressure | 2.0 - 3.0 bar |
| Number of cylinders | 5 |
| Injector firing order | 1 - 2 - 4 - 5 - 3 |
| Injector pressure | 1600 bar |
| Turbo pressure | < 2.09 bar/rpm |
| Max. no-load governed speed | 4600 rpm |
| Maximum rail pressure | 1900 bar |
| Exhaust gas analysis | Euro 3: < 2.5\x0AEuro 4: < 1.5 m-1 |
Cooling system
| Cap pressure | 1.5 bar |
Electrical
| Battery | 100 Ah |
| Alternator | 140 / 160 A |
Capacities
| Engine sump, incl. filter | 6.5 l |
| Manual transmission | M56 |
| Gearbox refill | 2.1 l |
| Automatic transmission | AW55-50 SN |
| Initial filling | 7.2 l |
| Gearbox refill | 3.0 l |
| Differential, 4WD rear | 0.7 l |
| Cooling system | 9.0 l |
| Air-conditioner refrigerant | 1000 ± 50 g |
| Air-conditioner compressor oil | 180 ± 15 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 20 Nm |
| Cylinder head bolts — Stage 3 | 20 Nm |
| Cylinder head bolts — Stage 4 | 50 Nm |
| Injector nozzle | 13 ± 1 Nm |
| Oil plug | 38 Nm |
| Oil filter | 25 Nm |
| Big-end bearing cap — Stage 1 | 20 Nm |
| Big-end bearing cap — Stage 2 | 90 ° |
| Big-end bearing cap — Stage 6 | 90 ° |
| Inlet manifold | 19 Nm |
| Glow plugs | 10 Nm |
| Exhaust manifold | 30 Nm |
| Crankshaft gearwheel | 300 Nm |
| Automatic transmission drain plug | 35 Nm |
| Manual transmission drain plug | 35 ± 8 Nm |
| Front hub | (-> 2001) |
| Front hub | (2001 ->) |
| Wheel nuts | 140 Nm |
Emissions
| Emission code | 70/220*2001/1A |
| Emission standard | Euro 3 |
| CO2 average | 171 - 177 g/km |
| CO | 0.363 g/km |
| NOx | 0.370 g/km |
| HC NOx | 0.405 g/km |
| Particles | 0.035 g/km |
| Emission code | 70/220*2001/100A |
| Emission code | 70/220*2002/80A |
| CO2 average | 171 g/km |
| CO2 average | 194 g/km |
| CO | 0.115 g/km |
| NOx | 0.389 g/km |
| HC NOx | 0.413 g/km |
| Particles | 0.032 g/km |
| Emission standard | Euro 3 (11/2001 ->) |
| CO2 average | 209 - 215 g/km |
| CO | 0.192 g/km |
| NOx | 0.360 g/km |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a D5244T2 problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.