AUDI / VOLKSWAGEN / SEAT CZCA — 1.4L Engine
1.4L · 124-125 hp
Engine overview
Manufacturer
AUDI / VOLKSWAGEN / SEAT
Displacement
1.4 L
Power
124-125 hp
Production years
2014-now
Fuel type
Petrol
Vehicles with this engine
8V
AM
5F
Torque figures by job
From the step-by-step procedures for this engine — each figure sits in the step that uses it.
Removing engine
- 20 Nm (15 lb-ft) — Screw bolt (1) through hole "“B”" on engine support T10497 and tighten to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 onto engine support T10497 and tighten bolt (1) to
- 20 Nm (15 lb-ft) — Screw bolt (1) through hole "“B”" on engine support T10497 and tighten to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 onto engine support T10497 and tighten bolt (1) to
Removing engine
- 20 Nm (15 lb-ft) — Screw in bolt (1) through hole "“B”" in engine support T10497 and tighten it to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 to engine support T10497 and tighten bolt (1) to
Removing and installing sealing flange on gearbox side
- 30 Nm (22 lb-ft) — Screw locking pin T10340 into cylinder block as far as stop, and tighten it to
- 35 Nm (26 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 40 Nm (30 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 45 Nm (33 lb-ft) — If the specification is not achieved, tighten nut of assembly tool T10134 to
- 20 Nm (15 lb-ft) — Screw in bolt (1) through hole "“B”" in engine support T10497 and tighten it to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 to engine support T10497, and tighten bolt (1) to
Removing engine
- 20 Nm (15 lb-ft) — Screw in bolt (1) through hole "“B”" in engine support T10497 and tighten it to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 to engine support T10497 and tighten bolt (1) to
- 20 Nm (15 lb-ft) — Screw in bolt (1) through hole "“B”" in engine support T10497 and tighten it to
- 20 Nm (15 lb-ft) — Fit adapter T10497/3 to engine support T10497, and tighten bolt (1) to
Removing and installing sealing flange on gearbox side
- 30 Nm (22 lb-ft) — Screw locking pin T10340 into cylinder block as far as stop and tighten to
- 35 Nm (26 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 40 Nm (30 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 45 Nm (33 lb-ft) — If the specification is not achieved, tighten nut of assembly tool T10134 to
Removing and installing sealing flange on gearbox side
- 30 Nm (22 lb-ft) — Screw locking pin T10340 into cylinder block as far as stop and tighten to
- 35 Nm (26 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 40 Nm (30 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 45 Nm (33 lb-ft) — If the specification is not achieved, tighten nut of assembly tool T10134 to
Removing and installing sealing flange on gearbox side
- 30 Nm (22 lb-ft) — Screw locking pin T10340 into cylinder block as far as stop and tighten to
- 35 Nm (26 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 40 Nm (30 lb-ft) — Tighten nut (B) of assembly tool T10134 to
- 45 Nm (33 lb-ft) — If the specification is not achieved, tighten nut of assembly tool T10134 to
Engine codes in the same family
The same code prefix usually means the same block with a different output, fuel or model year. Procedures are often shared — check the code on the engine plate.
Workshop procedures for this engine
Step-by-step procedures from the workshop database, carrying 99 torque figures.
- Removing toothed belt from camshaft – VW Golf VII · 14 torque figures
- Removing and installing toothed belt, vehicles without adjustable exhaust camshaft · 5 torque figures
- Removing and installing toothed belt, vehicles with adjustable exhaust camshaft · 5 torque figures
- Removing toothed belt from camshafts, vehicles with adjustable exhaust camshaft · 5 torque figures
- Removing toothed belt from camshafts, vehicles without adjustable exhaust camshaft · 5 torque figures
- Removing toothed belt from camshaft · 4 torque figures
- Removing and installing toothed belt - engine codes CPTA, CZEA · 4 torque figures
- Removing and installing high-voltage wiring harness for high-voltage battery · 6 torque figures
- Detaching toothed belt from camshaft - engine codes CPTA, CZEA · 4 torque figures
- Removing and installing toothed belt, engine codes CMBA, CPVA, CXSA, CZCA, CPVB · 3 torque figures
- Removing and installing high-voltage wiring harness for drive motor · 6 torque figures
- Removing and installing toothed belt - engine codes CUKB, CXUA · 3 torque figures
- Removing and installing toothed belt - engine code CZDB – Audi · 3 torque figures
- Removing and installing toothed belt - engine code CSSA – Audi · 3 torque figures
- Removing engine - all engine codes except CUKB, CXUA – Audi A3 · 2 torque figures
- Removing engine - engine codes CUKB, CXUA – Audi A3 · 2 torque figures
- Removing engine, Golf Cabriolet · 2 torque figures
- Removing engine, Sharan, CC and Tiguan · 2 torque figures
- Removing toothed belt from camshafts, engine codes CMBA, CPVA, CXSA, CZCA, CPVB · 3 torque figures
- Detaching toothed belt from camshaft - engine codes CUKB, CXUA · 3 torque figures
- Detaching toothed belt from camshaft - engine code CZDB · 3 torque figures
- Detaching toothed belt from camshaft - engine code CSSA · 3 torque figures
- Removing and installing toothed belt - engine code CZCA – Audi · 3 torque figures
- Removing and installing toothed belt - engine codes CJZA, CMBA, CXSA, CXSB, CYVB, CZCA, DBWA · 3 torque figures
- Detaching toothed belt from camshaft - engine code CZCA · 3 torque figures
Got a CZCA problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 14 Oct 2026.