MITSUBISHI / SMART 135.930 — 1.3L Engine
1.3L · 95 hp
Engine overview
Vehicles with this engine
Factory specifications
Values from the manufacturer documentation for this engine.
Engine (general)
| Engine code | 135.930 |
| Capacity | 1332 cc |
| Idle speed | 850 rpm |
| Normal | 13.2 bar |
| Minimum | 9.0 bar |
| Differential limit between cylinders | 0.98 bar |
| Inlet | 0.22 ± 0.04 mm |
| Exhaust | 0.30 ± 0.04 mm |
| Oil pressure | >1.5 / 850 bar/rpm |
| Normal | 14.3 bar |
| Minimum | 10.0 bar |
| Differential limit between cylinders | 1.0 bar |
Engine (petrol)
| Fuel system (make and type) | Mitsubishi MPi |
| Number of cylinders | 4 |
| Firing order | 1 - 3 - 4 - 2 |
| Spark plugs (make and type) | Bosch FR7SE Bosch FR7NPP33 |
| Spark plug gap | 1.0-1.1 mm |
| Injection pressure/system pressure | 3.24 bar |
| Lambda | 0.97 – 1.03 |
| CO at fast-idle speed | < 0.3 % |
Cooling system
| Cap pressure | <1.4 bar |
| Cap pressure | 0.74-1.03 bar |
| Thermostat opens at | 82 °C |
Electrical
| Alternator | 85 A |
Capacities
| Engine sump, incl. filter | 4.2 l |
| Manual transmission | F5MG |
| Gearbox refill | 1.7 l |
| Cooling system | 4.6 l |
| Air-conditioner refrigerant | 430 ± 20 g |
| Air-conditioner compressor oil | 100-115 ml |
Torque settings
| Cylinder head bolts — Stage 1 | 25 Nm |
| Cylinder head bolts — Stage 2 | 90 ° |
| Cylinder head bolts — Stage 3 | 90 ° |
| Spark plugs | 25 Nm |
| Oil plug | 39 Nm |
| Oxygen sensor | 50 Nm |
| Front hub | 235 ± 19 Nm |
| Rear hub | 68 Nm |
| Wheel nuts | 108 ± 10 Nm |
Emissions
| Emission code | 70/220*2003/76B |
| Emission standard | Euro 4 |
| CO2 average | 119 - 143 g/km |
| CO | 0.278 - 0.325 g/km |
| HC | 0.050 - 0.073 g/km |
| NOx | 0.022 - 0.023 g/km |
| CO2 average | 138 g/km |
| CO | 0.236 g/km |
| HC | 0.081 g/km |
| NOx | 0.022 g/km |
| CO2 average | 138 - 143 g/km |
| CO | 0.236 - 0.325 g/km |
| HC | 0.073 - 0.081 g/km |
Workshop procedures for this engine
Step-by-step procedures from the workshop database.
Got a 135.930 problem? Ask for free.
Describe the symptoms — TorqFix replies with a diagnosis cited from verified workshop data.
Get free diagnosis →Who makes these pages, and how
TorqFix was built by a mechanic — after a 2,700 km drive with five roadside repairs that no diagnostic tool could explain.
The figures on this page come from manufacturer workshop documentation and are shown as they are. The page is assembled automatically from that data — it is not written by an AI. The AI works in the chat, where it answers for your specific car. It writes nothing here.
Variants of the same model differ. Cross-check torque against the factory manual for your engine before final tightening.
Seen a figure that does not match your manual? Write to us — we correct it and note when. support@torqfix.com
The story behind TorqFix →Workshop data on this page last updated 22 Aug 2026.